What is C3KX nm 10G?

What is C3KX nm 10G?

The C3KX-NM-10G Network Module from Cisco is a network module for uplink ports compatible with the Cisco 3750-X and 3560-X series switches. The module has four slots, two can be used to support 1-GB SFP modules, while the other two slots support both 1-GB SFP and 10 GB SFP+ modules.

What is C3KX nm 1G?

C3KX-NM-1G Network Modules Catalyst 3560-X, 3750-X Series Catalyst 3K-X 1G Network Module option PID. The Cisco Catalyst 3750-X Series and 3560-X Series Switches support an optional network module for uplink ports.

Is Cisco 3750 A PoE+?

Cisco WS-C3750X-48PF-S Catalyst 3750X 48 Port Full PoE, Refurbished, Original. The Cisco Catalyst WS-C3750X-48PF-S switch is an enterprise-class managed switch that offers 48 Gigabit Ethernet PoE+ ports (30 Watts on each port) as well as stacking capabilities.

How do I reset my Cisco Catalyst 3750 password?

Password Recovery – Reset Procedure

1. On a 3750-X switch, Power off the entire stack or standalone switch.
2. Reconnect the power to the switch (standalone 3750-X or 3750-X) or stack master (3750-X stack only).
3. Now initialize the flash file system, rename the startup configuration file (config.text) and boot the IOS:

What is LAN PoE?

Power over Ethernet (PoE) is a technology for implementing wired Ethernet local area networks (LANs) that enables the electrical current necessary for operating each device to be carried by Ethernet data cables instead of standard electrical power cords and wiring.

Is Cisco 3750G PoE?

Cisco Catalyst switch with (48) 10/100/1000 PoE ports and (4) SFP Gigabit Ethernet ports….Details.

Is the Cisco 3750 a switch or a router?

It is a switch, not a router. It is also no longer supported.

How do I wipe a Cisco 3750?

There is another method:

1. Break the stack;
2. Power up the switch individually;
3. Hold down the “Mode” button for 30 seconds and release;
4. The switch will reboot into factory default;
5. Console into the switch;
6. Delete the files VLAN.dat, VLAN.dat.backup, config.text, config.text.backup.
7. Renumber the stack.

Is PoE DC or AC?

Per IEEE standards, PoE is injected into a cable at voltage between 44 and 57V DC, typically 48V DC. Typically, anything less than 35V AC or 60V DC is considered safety extra low voltage (SELV), so by definition, PoE-enabled ports are SELV.

Can CAT5 do PoE?

CAT5E and higher will support PoE on all voltages. CAT5 will support lower voltages too. Anything lower is not recommended.

Is a Cisco 3750 a managed switch?

Yes, the Cisco Catalyst 3750 switches can be managed using the Web-based Cisco Cluster Management Suite (CMS) Software, which uses Cisco Switch Clustering technology.

What is the Catalyst 3750-X service module?

The new Cisco Service Module offers enhanced security and Flexible Netflow (FNF) features on the uplink ports of the Catalyst 3750-X and 3560-X. The service module is supported with IP Base or IP Services feature set. It can be used with SFP or SFP+ at 1G or 10G speeds.

What are the primary features of the 3750-X and 3560-x series?

Cisco Catalyst 3750-X and 3560-X Series primary features: ● 24 and 48 10/100/1000 PoE+, non-PoE models, and 12 and 24 GE SFP port models ● 24 and 48 10/100/1000 UPOE-capable models with Energy Efficient Ethernet (EEE) support ● Four optional uplink network modules with GE or 10GE ports

What are the Cisco Catalyst 3750-X and 3560-x series switches?

The Cisco Catalyst 3750-X and 3560-X Series Switches are an enterprise-class lines of stackable and standalone switches, respectively.

How many 10GbE ports does a Catalyst 3750 have?

The Cisco Catalyst 3750-X Series stacks up to nine switches as a single logical unit for a total of 432 Ethernet 10/100/1000 ports with 18 10GbE ports. Individual 10/100/1000 units can be joined in any combination to evolve with network needs.