How much does a carbon mast cost?
Price for a Carbon fiber mast ranges from $975 for a mizzen to $2,250 for a large mast.
How to identify Selden mast?
Take note of the mast section shape. This will help identification and the use of correct measurements. The Section Length of the mast can usually be found in the number engraved at the mast heel. For example K23-170-1233.
Where are Selden masts made?
All Seldén’s carbon masts, both furling and conventional, are manufactured at its facility in Gosport using its unique computer-controlled mandrel filament winding technique.
Is carbon fiber mast A?
Carbon fibre has long been the material of choice for racing yacht masts. It used to be an exotic material, but it can now be found in many things from pens to pushbikes. Carbon fibre is stiffer and weighs less than other mast materials, but it’s also quite a lot more expensive.
Is a carbon fiber mast worth it?
FAQs: Is a carbon mast worth the extra cost? For many, yes. Carbon saves a lot of weight aloft, so it reduces heeling and pitching, making boats faster, more close-winded, and noticeably more comfortable.
How long do carbon fiber sails last?
Unfortunately, shape life degrades more rapidly than structural life. It depends on harshness of use, but even when treated well, sails can only be expected to retain good shape for half to two-thirds of the structural life of a sail – that’s roughly 1,700 to 2,700 hours of use.
How much lighter is a carbon mast?
about 40% to 60% lighter
A carbon mast tube is about 40% to 60% lighter than if it was in aluminum, depending on the fibers used and the fabrication method. The weight gain is also important on the standing rigging as it is sized for lesser loads.
Is a carbon mast worth it?
Is a carbon mast worth the extra cost? For many, yes. Carbon saves a lot of weight aloft, so it reduces heeling and pitching, making boats faster, more close-winded, and noticeably more comfortable.
How long does a carbon fiber mast last?
The estimated lifespan of carbon rigging is 15 years, compared to 4-8 years between PBO and rod.
What qualifications do I need to sail around the world?
The most accepted are the International Certificate of Competency (ICC) and the International Sailing License and Credentials (SLC). The ICC is recognized by the United Nations and used through much of Europe and the Mediterranean, and should qualify you for any charter.
What are yacht masts made from?
Aluminium masts are made from extrusions that are created by pulling the material through a die, the size of which determines both the diameter and wall thickness.
How much does a sailboat mast weigh?
The current mast on the market weighs between 50–60 lbs. While this is not extremely heavy, the center of gravity is approximately 13.5 feet from the end of the mast. This high center of gravity makes it tough to raise and lower the mast when launching the boat.
How do you clean a carbon fiber mast?
if you catch it early you can just do a light sand, clean it off well with acetone followed by a special cleaner and one or two coats of Awlgrip (with no sanding in between if you do the second coat at jusst the right time.
What masts does Seldén offer?
Today Seldén offers a full range of masts in both aluminium and carbon fiber. All rigs are custom-made, through every calculation and detail, for each individual boat. We know how much depends on the rig, and there is no room for compromise. Carbon composite combines stiffness and strength with low weight.
How does a Seldén furling mast work?
The Seldén furling masts come with twin cable conduits, enabling the cables to run freely and well protected from all running rigging. The cable conduits also facilitate cable replacement. There is an outhaul line for rolling out the sail, and an endless line for rolling it in. It’s simple as it sounds.
What are the advantages of Seldén carbon spars?
Seldén low weight carbon spars have accentuated longitudinal stiffness. This means that forestay tension can be substantially increased. All experienced racing sailors know what this means in terms of increased performance.
How do I use the e40i motor on a Seldén furling mast?
The motor can be retrofitted to Seldén furling masts type RB (~36-43’ yachts). Push the ”OUT” button and the sail will start to unfurl. The E40i winch will tension up the outhaul while the mast motor feeds out the sail. The speed is increased when the ”IN” button is pushed in addition to ”OUT”.