How do you use a 1/4 drain auger?

How do you use a 1/4 drain auger?

To use, you run the auger line through the handle and push the wire through the pipe. Once you are set to auger, tighten the nut on the handle and turn it. As it moves through the pipe, you can move the handle. The end of the auger wire will grab clogs (long hair in my case).

Do plumbing snakes come in different sizes?

Drain Snake It is primarily used for clogs in tubs, showers, bathroom sinks, washing machines, and sometimes kitchens sinks. Most have a 25- or 50-foot cable with a corkscrew tip for snagging debris. They come in many different shapes and sizes as well as manual and electric.

What is the difference between a drain snake and an auger?

Drain snakes work for smaller drains like your kitchen or bathroom sink. Drain augers tackle larger pipes like your toilet or shower drain. The snake covers lines from 1-1/4″ – 2″ range, and you’ll use an auger for lines in the 1-1/2″ – 3″ range.

What is the smallest diameter drain snake?

There are five main diameters for drain snakes, these are: 1/4″, 5/16″, 3/8″, 1/2″ and 9/16″. Each size has a recommended range of drain pipe diameters they are suitable for. An easy way to classify and remember these is to separate them into small, medium, large and extra-large categories.

What size snake do I need?

Major types of sewer cables & drain snakes

BATHTUB 1-1/2″ — 2″ 1/4″ OR 5/16″
SHOWERS 2″ — 3″ 5/16″, 3/8″ OR 13/32″
FLOOR DRAIN 3″ OR MORE 3/8″, 13/32″, 1/2″, 5/8″, 3/4″ OR 0.55″
FLOOR DRAIN 4″ — 5″ 1/2″, 5/8″, 3/4″, 0.55″ OR 0.66″

How do you connect a drain snake to a drill?

How to Use. Attach the drill to the attachment by tightening the chuck around it. Loosen the thumbscrew to release the drain cleaning cable. Once the thumbscrew is loosened, pull the snake out and insert it into your drain until the clog is reached.

What sizes do drain snakes come in?

How do you make a homemade drain snake?

How to Make a Snake for Unclogging a Shower Drain

  1. Unwind a Coat Hanger. Disassemble the coat hanger by unwinding the looped end of the wire from the hook part of the hanger, advises Modern Era Plumbing & Gas Solutions.
  2. Create a Nub.
  3. Press Sticky Tape Onto the Nub.
  4. Place the Snake in the Drain.
  5. Run Hot Water.
  6. Clean the Shower.

Is it worth buying a drain snake?

Manual drain snakes are very easy to find in most home improvement stores. They usually have a small hand crank to advance or retract the cable and can be one of the most effective methods for clearing small clogs in the toilet, tub, kitchen sink, or bathroom sink.

Can snaking a drain make a clog worse?

While drain snakes can be very effective in clearing certain clogs, sometimes they can actually exacerbate a problem. For example, if your pipes are old and corroded, sticking a drain snake down there can scrape off chunks of metal, making the clog much worse and damaging your pipe.

What size drain snake should I use?

What can I use instead of drain snake?

A drain snake (also called a plumber’s snake or auger) is a drain cleaning tool that plumbers have used for generations. If you don’t have a drain snake at your home, you can use a pipe cleaner, a straightened clothes hanger, or make this simple tool out of a plastic bottle: Start with an empty 2-liter plastic bottle.

How much does a plumber snake cost?

How Much Is A Plumbing Snake? A handheld or drill-activated plumbing snake costs $15 to $100 and reaches up to 25 feet for minor clogs near the sink basin or toilet. A machine-powered plumbing snake costs $250 to $1,000 on average and reaches 50 to 75 feet for most residential blockages.

What can I use instead of a plumbers snake?