Table of Contents
What size washer fits M8 bolt?
Dimensions for DIN125 Form A Washers
| Bolt Size | Inside Diameter | Outside Diameter |
|---|---|---|
| M6 | 6.4mm | 12mm |
| M7 | 7.4mm | 14mm |
| M8 | 8.4mm | 16mm |
| M10 | 10.5mm | 20mm |
What size are M8 washers?
Metric Washers
| Size | Inside Diameter | Outside Diameter |
|---|---|---|
| M5 | 5.3mm | 10mm |
| M6 | 6.4mm | 12mm |
| M7 | 7.4mm | 14mm |
| M8 | 8.4mm | 16mm |
How do I size a washer for bolts?
Most manufacturers usually specify size and OD in fractional inches, although some occasionally use decimal measurements. Example: If you’re determining the diameter of a washer (without knowing the package specs) and measure 5/16 of an inch, it most likely fits a bolt with a diameter of one-quarter of an inch.
What size is a #8 flat washer?
0.174″
Standard Round Washers in 304 Stainless Steel
| Flat Washer Sizes | Inner Diameter (ID) | Outer Diameter (OD) |
|---|---|---|
| #6 | 0.149″ | 0.375″ |
| #8 | 0.174″ | 0.375″ |
| #10 | 0.203″ | 0.437″ |
| #12 | 0.250″ | 9/16″ |
How do you size a flat washer?
Washer sizes correspond to the screw/bolt diameter they fit. For example, a 1/2” washer fits a 1/2” bolt, and therefore has an inner diameter of just over 1/2”.
Do M8 washers fit M8 bolts?
An M8 washer just has a hole in it that is large enough to take an M8 bolt (i.e. 8mm diameter). A size 8 screw is a completely unrelated size, measured by screwgauge.
What washers work with 8 screws?
Stainless Steel Flat Washer (#8 Screw Size)
How do I know what size my flat washer is?
What sizes are washers?
Front-Load Washers and Dryers
| General Dimensions of Front-Load Washers and Dryers | Compact | Full-Size |
|---|---|---|
| Width | 24 inches | 27 inches |
| Height | 34 inches | 39 inches |
| Depth (door closed) | 24 inches* | 32-34 inches* |
| Depth (door open) | 42-44 inches* | 54-57 inches* |
Is M8 8mm diameter?
Hole Sizes for Metric Bolts The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
What size washer do I need for #8 screw?
| SIZE | INSIDE DIAMETER | THICKNESS |
|---|---|---|
| #6 | 5/32″ | 3/64″ |
| #8 | 3/16″ | 3/64″ |
| #10 | 7/32″ | 3/64″ |
| 1/4 | 9/32″ | 1/16″ |
What size washer fits a 3/8 bolt?
Flat Washer Dimensions
| Bolt Size | USS | SAE |
|---|---|---|
| 1/4 (#14) | 0.734 | 0.281 |
| 5/16 | 0.875 | 0.344 |
| 3/8 | 1.000 | 0.406 |
| 7/16 | 1.250 | 0.469 |
How do I know what size washer to buy?
One to two person household can use a small to medium size washer (1.8 to 3.5 cu ft) while a family should opt for a large washer (3.6 to 5.1 cu ft). The dryer should be almost twice as large as the washer so wet clothes can tumble freely and dry more quickly.
What size bolt is 8mm?
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that’s slightly under 8mm which means that the bolt should fit through an 8mm hole.
What size is a 8 mm bolt?
Metric Shoulder Bolt Dimensions
| Shoulder Diameter (A) | Thread (C) | Head Diameter (E) |
|---|---|---|
| 6mm | 5mm x 0.8 | 10mm |
| 8mm | 6mm x 1.0 | 13mm |
| 10mm | 8mm x 1.25 | 16mm |
| 12mm | 10mm x 1.5 | 18mm |
How big is a 4.2 washer?
A regular-capacity washer between 3.1 and 4.0 cubic feet will let you load in 12 to 16 pounds of laundry, while a larger-capacity model between 4.2 and 4.5 cubic feet can hold up to 20 pounds or more.
What sizes do washers come in?
Compact washers are normally 2.30 to 2.45 cubic feet, while standard and high efficiency top-load washers may range from 3.1 to 4 cubic feet. If you need one with a larger capacity, check the front loaders. They can range from 4.2 to 4.5 cubic feet. Sometimes, they can go as big as 5 cubic feet.
https://www.youtube.com/watch?v=ehnXhUH9GGM