Table of Contents
What kind of brush can I use on vinyl records?
The best record-cleaning brushes use either delicate antistatic bristles, soft velvet pads, or plastic rollers to gently pick up accumulated dust and dirt from your records without scratch your vinyl’s delicate surface.
Can I use a paintbrush to clean vinyl records?
Circle the grooves with a soft, wide paintbrush to spread the solution for a minute per record side. Rinse with lots of distilled water. Employing a dry record cleaning brush just before playing an LP can also help sweep away surface dust.
How do you clean vinyl records without a brush?
How To Clean A Vinyl Record On A Budget
- Warm water. Some people say you should use hot water, but there’s no real benefit to that.
- Dish soap (or record cleaning solution) Dish soap is the cheapest option, but it will leave a bit of residue on your records.
- Carbon Fiber Brush.
- Soft, Lint-Free Cloth.
Do I need a vinyl brush?
A Vinyl Cleaning Brush Whether your record is freshly pressed or 50 years old, using a cleaning brush can make a big difference. This one from Boundless Audio has carbon fiber bristles that’ll go deep into the grooves of your album to remove dirt, hair, and dust that has gotten stuck inside.
What can I use instead of a record brush?
As for brushes, any soft brush with artificial bristles would be good, as long as you only use it when wet. You can always cut down the bristles to get a decent surface brush.
How do you clean a vinyl record without a brush?
Can I use a makeup brush to clean records?
It’s a makeup brush. It’s not carbon fiber. It’s not designed for cleaning/dusting vinyl records. The bristles fall out and get stuck on the record.
Do I need a record brush?
We we’re recommending Boundless Audio’s brush over others because it’s anti-static and electrically conductive. Static can attract dust particles to your album, so using this brush actually provides proactive protection. To use the brush, place your record on your turntable and turn the power on.
How do you clean vinyl records by hand?
How to Clean Vinyl Records
- Wipe gently. Remove all dust and static using a microfiber cloth, using very little pressure to avoid driving any particles further into the grooves in the vinyl.
- Rinse.
- Apply Simple Green solution.
- Damp-wipe clean.
- Dry.
- Spin and store properly.
Are record brushes good?
A Vinyl Cleaning Brush The bristles are effective at cleaning, but soft enough that they won’t damage your record during use.
What is the safest way to clean vinyl records?
Dampen a clean microfiber cloth with water (distilled water is preferred), and lightly wipe the entire surface of the record in a circular motion with the grooves of the record, being careful to avoid the center label.
Is it OK to clean vinyl records with water?
If you notice persistent dust or dirt in the grooves of the records, then rinse your records with cool water. Ideally, you want to use distilled water to avoid impurities from your tap getting into the grooves of the record. Try to avoid the label when cleaning with water. Dry the record completely before you play it.
How do you clean records without a brush?
How do you make homemade record cleaner?
The exact mixture is one part isopropyl alcohol, one part distilled water, and one to two drops of dishwashing soap. This combination of fluids is widely recommended as an efficient mixture to clean records using what are household materials. The three ingredients were easy to measure and easy to mix.
Can you use a makeup brush to clean a record?
What is the best record cleaning brush for vinyl records?
The next record cleaning brush I recommend in combination with the AT 6012 is the AudioQuest Carbon Fiber Record Brush. After cleaning with the AT 6012 this vinyl record brush makes it easy to keep your LP’s relatively dust free between wet cleanings. Pros – Very well priced based on long life of this brush.
How do I clean my records with a velvet brush?
Velvet brushes can also be used with record cleaning solutions for a deeper clean. Whenever you clean your records, you’ll want to avoid touching the brush’s surface directly with your fingertips. The natural oils from your fingers can transfer from the brush onto the record and create smudges that catch dirt and are more difficult to clean.
Should you wet clean or dry clean your record?
It is a good idea to brush your record first, even if you plan to proceed to a wet cleaning method. Dry brushing will remove some of the particles that could scratch your record if paired with liquid. Keep an eye on your brush and get a new one if the fibers appear bent or aged. Also, keep a brush specifically reserved just for your records.
What is the best record cleaning fluid?
GrooveWasher is by far our current favorite record cleaning fluid. Their G2 Fluid is a single-step cleaning method that leaves no residue behind, avoiding the need for any secondary rinse. The company performed years of research and testing, guided by the popular 1970s Discwasher.