Table of Contents
What is tinned music wire?
Tinned coated music wire is a process normally done after the wire has been produced. It is a product generally done by an approved third party source and to the customers specific demands for coating weights.
Is music wire galvanized?
Galvanized Music Wire is generally a redrawn hot dipped or electrogalvanized product. It offers additional corrosion resistance to the standard phosphate coated music wire properties. The physical properties of the wire are found in the music wire product page.
What material is music wire made of?
high carbon steel
Music wire is a highly versatile type of wire, however as the name implies, it is best known for only one of its uses. It is made from high carbon steel, making it ideal for high-stress applications such as piano strings.
Is music wire and piano wire the same?
Music wire springs are springs made of a particularly strong type of steel known as music wire. Also known as piano wire, music wire consists of tempered, high-carbon spring steel. In the past, most pianos were made of iron-based wire. In the 1830s, music wire began to replace this iron-based wire.
How hard is music wire?
While music wire is highly versatile, it is not indestructible. It can endure heavy loads, but it can give way under “shock” loads—that is, sudden, high-impact levels of stress. Also, temperature extremes can affect its ability to perform, so it isn’t recommended in situations of extreme heat or cold.
What grade of steel is music wire?
Music wire, also known as piano wire or spring wire, is a high-carbon steel alloy famous for its high tensile strength and high elastic limit. Music wire derived its name from one of its most popular applications, piano strings.
How do you harden music wires?
To anneal it, heat the wire with a torch until it becomes a bright cherry red—about 1400 degrees Fahrenheit. Let it cool completely to the touch. Don’t quench it or blow on it. Just let it cool naturally away from any drafts.
What metal is piano wire?
Piano wire, or “music wire”, is a specialized type of wire made for use in piano strings but also in other applications as springs. It is made from tempered high-carbon steel, also known as spring steel, which replaced iron as the material starting in 1834.
How do you heat treat music wire?
First the wire should be annealed at the location to be bent. To anneal it, heat the wire with a torch until it becomes a bright cherry red—about 1400 degrees Fahrenheit. Let it cool completely to the touch. Don’t quench it or blow on it.
Can you weld piano wire?
I also had a hard time soldering piano wire to a brass coupling. Used JB Weld instead, works great. Stay-Brite solder seems to be the ticket.
What kind of steel is piano wire?
Piano wire is also known as piano wire, belongs to high carbon steel.
Can music wire rust?
Music. Music wire is considered a superior carbon steel. Although it will rust very quickly, as will all other carbon steels, it has a very good surface finish, making it the best choice for springs that require high life.
Does music wire need to be heat treated?
To restore the wire to its original specific spring temper, it must be heat-treated a second time and cooled at a controlled rate. To form wire easily, first anneal it; next, form or bend it to the desired shape; and then heat- treat the part back to spring condition — that is, temper it.
Can piano wire be hardened?
The only effective way to harden and anneal music wire parts is with an oven or kiln. The wire parts we use so often are just too long and thin to do the job properly with anything hand held for something like a landing gear.
Can you strangle someone with piano wire?
The Garrote wire is used to strangle one’s opponent or cut into the neck, slicing through the carotid arteries. Because it is easily concealable, silent, and deadly, it is often used for assassinations in situations when a gun is not a suitable option.
Are music wires weldable?
Piano wire can be silver soldered (using REAL silver solder obtained at a welder’s supply or a jeweler’s supply). True silver solder is a wire of silver about 1/32 in in diameter and it is very hard and stiff.
How do you connect piano wires?
use some flux paste a gas touch and pumbers solder get the wire glowing red and dob the solder stick onto it , it will flow easy round the wire and looks like silver solder to . But as stated silver solder or a brazing rod is really the strong method .