Trending

What is the difference between Mercury Bigfoot and regular?

What is the difference between Mercury Bigfoot and regular?

The Bigfoot gear case is built longer with larger parts. This provides greater control and thrust, specifically designed for larger loads, according to Mercury, which also states that the larger parts make the engines more efficient and reliable.

What does Elpt CT mean on a Mercury motor?

This part of a boat also is referred to as the transom. An ELPT outboard is an acronym meaning the motor has electric start, long shaft and power trim features.

How fast does 60hp go?

25 mph to 30 mph
16′ aluminum boats are popular and a 60-hp engine will typically propel them from 25 mph to 30 mph top speed, depending on load.

How much is a 60 horse Mercury?

$8,999.00. In Stock – Brand New 60 Hp Mercury 4-Stroke Command Thrust outboard motor. Includes Electronic Fuel Injection (EFI) plus Power Tilt & Trim. Command Thrust Lower Unit is geared for greater thrust.

How much does a 60 hp Mercury outboard cost?

Is command thrust worth it?

Command Thrust models are most beneficial for larger, heavier or fully-loaded boats that need more thrust or are used for commercial or heavy-duty applications. Some examples include boats with a deep V hull, commercial workboats, offshore fishing boats, high-use boats, and houseboats and pontoons.

Where are 60 HP Mercury made?

Mercury currently manufactures some engine components in China and is shifting production of 40- to 60-horsepower four-strokes to the new factory near Beijing.

How much does a 60hp Mercury outboard cost?

How fast is a 60hp Mercury 4-stroke?

60hp Mercury FourStroke Big Foot outboard performance

THROTTLE SETTING SPEED RPM
TROLL 2.6kts (4.9kmh) 800
MIN. PLANE 11.1kts (20.5kmh) 3300
CRUISE 17.2kts (31.9kmh) 4000
MAX. CRUISE 23.2kts (43.1kmh) 5000

How much is a 60hp Mercury outboard?

How many cylinders does a 60hp Mercury have?

2020 Mercury Marine® FourStroke 60 EFI Command Thrust Engine features: 4-cylinder 4-stroke engine with EFI, Command Thrust gearcase, electric start, remote steering, power trim and tilt, and shaft length designed for boats with 20” transoms.

How much does a Mercury 60 hp weight?

247 lbs /
Specifications – 60 EFI

HP / kW 60 / 45
Gearcase ratio 1.83:1 or 2.33:1 (CT model)
Dry weight *Lightest model available 247 lbs / 112 kg
CARB star rating 3
Bore and stroke 2.56 x 2.95″ / 65 x 75 mm

How much does a 60 HP Mercury 4-stroke weight?

Specifications – 60 EFI

HP / kW 60 / 45
Dry weight *Lightest model available 247 lbs / 112 kg
CARB star rating 3
Bore and stroke 2.56 x 2.95″ / 65 x 75 mm
Ignition ECM 07 Digital Inductive (CT model) ECM 70

What is the difference between Mercury thrust and command?

What is Command Thrust? Mercury Command Thrust is a range of Mercury outboards that have been introduced with larger gear cases, longer props, and larger gear ratios. This results in more lift, better acceleration, improved handling and added durability.

What is mercury CT?

Enhanced fuel injection for boosted efficiency The rugged Mercury Marine Command Thrust “CT” gearcase swings a bigger prop deeper in the water for dramatic improvement in thrust and control for heavier boats.

How much does a 60 hp Mercury outboard weight?

247 lbs
Specifications – 60 EFI

HP / kW 60 / 45
Shaft length 20″ / 508 mm 25″ / 635 mm (CT model)
Gearcase ratio 1.83:1 or 2.33:1 (CT model)
Dry weight *Lightest model available 247 lbs / 112 kg
CARB star rating 3

Is the fourstroke 60 Big Foot a deep gear outboard?

Among boat engine manufacturers there’s been a trend back to deep gear ratio outboards that convert engine torque to thrust at the prop far more efficiently than smaller-ratio gearcases — and the FourStroke 60 Big Foot is one of these.

What are the advantages of a Bigfoot propeller?

According to Mercury, BigFoot’s propeller has up to 20 percent more surface area than competitive props, providing more working surface for greater overall thrust, acceleration and maneuverability. BigFoot is equipped with larger gears and shafts (up to 33 percent larger than competitive gears) for greater reliability and durability.

What kind of engine does a Mercury Bigfoot have?

BigFoot models are perfect for pontoons and large boats, while the Standard models are ideal for aluminum fishing boats, bay boats and inflatables. All 40-60hp Mercury BigFoot engines are electronically Fuel-Injected, which provides turn-key starting, increased power, improved fuel economy and spectacular reliability.

What size prop do I need for a big foot motor?

Big Foot motors are work boat and pontoon engines which “require” big props. If the tach is properly set (6P) then either the engine is not making full power or there is some excess drag on the boat. 40/50/60 HP Big Foot pontoon motors typically can run 14 x 9 to 14 x 13 four blade pontoon props.