Table of Contents
What is a Sundyne pump?
Sundyne Sunflo pumps utilize high speed technology to generate high pressure typically for boiler feed, reverse osmosis, NOx suppression, washdown (food and beverage production), injection, seal flush, and condensate return. Sundyne also has the widest range of sealless magnet drive pumps in the world.
What is sealless pump?
A sealless mag drive pump is a conventional centrifugal pump without the dynamic seal that would normally be used to seal the pump shaft. This dynamic seal is replaced by a static containment shell to form a completely sealed liquid end or pressure boundary.
Where is sundyne located?
Arvada, Colorado
Headquartered in Arvada, Colorado with operations and presence in Europe, the Middle East, India, Asia, Japan and China, Sundyne is a leading manufacturer of precision-engineered highly reliable, safe, and efficient centrifugal pumps and compressors for use in hydrocarbon processing, chemical processing, power …
What type of pump is a centrifugal pump?
non-positive displacement pump
A centrifugal pump is categorised as a non-positive displacement pump. Traps a certain amount of liquid and forces it from the suction to the discharge port. Flow rate remains constant as change in pressure.
Which type of pump is most efficient?
Where different pump designs could be used, the centrifugal pump is generally the most economical followed by rotary and reciprocating pumps. Although, positive displacement pumps are generally more efficient than centrifugal pumps, the benefit of higher efficiency tends to be offset by increased maintenance costs.
What is magnetic pump?
Magnetic drive pumps, also known as magnetically coupled pumps, vary from the traditional pumping style because the electric motor (the driver) is coupled to the pump by magnetic means rather than by a direct mechanical shaft. The pump works via a drive magnet that eliminates any shaft sealing required by the pump.
Is a pump a compressor?
Sometimes the words “pump” and “compressor” are used interchangeably, but there is a difference: A pump is a machine that moves a fluid (either liquid or gas) from one place to another. A compressor is a machine that squeezes a gas into a smaller volume and (often) pumps it somewhere else at the same time.
What type of pump is centrifugal pump?
A centrifugal pump is categorised as a non-positive displacement pump. Traps a certain amount of liquid and forces it from the suction to the discharge port. Flow rate remains constant as change in pressure.
Why is centrifugal pump better?
Centrifugal pumps are the most common pump type for the transfer of low viscosity fluids in high flow rate, low pressure installations, which makes them ideal for applications that require the pump to deal with large volumes.
Which pump is best for high pressure?
Plunger Pumps (Direct Flow) Plunger pumps put out significantly greater pressure than piston pumps. These high pressure pumps are available in a variety of drive options including belt drive, direct drive, gearbox and standard belt drive.
Which pump is more efficient centrifugal pump?
reciprocating pump
In general, a reciprocating pump is more efficient than a centrifugal pump. Reciprocating machines are generally applied on low-flow/high-head service. Centrifugal pumps can have efficiencies as low as 40 percent on low-flow/high-head service.
What happens if you run a magnetic drive pump dry?
One of major limitations of magnetic drive pumps is the risk associated with running dry. Because the pumped liquid will act as lubricant and coolant, in case of dry run, the bearing and some other parts could overheat and eventually become damaged.
What is magnetic drive centrifugal pump?
A magnetic drive pump uses a balanced magnetic field to create the rotation of the fluid impeller. Unlike a traditional centrifugal pump which has a direct drive connection between impeller and motor, a mag-drive pump eliminates the direct drive mechanism and replaces it with a magnetic field.