What is a NDS drain pipe?

What is a NDS drain pipe?

NDS French Drain systems manage surface water and protect property. Only NDS offers an engineered, gravel-free solution to traditional french drain systems, saving time and money.

How deep should a French drain be?

About 8 inches to 2 feet deep
French drain depth: About 8 inches to 2 feet deep should be sufficient for many water-diverting projects, though related systems, such as those built around foundations and sub-ground living spaces, as well as the bases of retaining walls, may be deeper.

How shallow can a French drain be?

The trench should be about 18 inches deep and 9 to 12 inches wide. French drains need to have a slope of at least 1 percent, so the force of gravity will work for you. This means that the drain should slope down a total of at least one inch for every 10 feet of pipe.

Does a French drain need an exit?

Short answer to the title of “Where should french drain terminate?” is that, ideally, the french drain will terminate to an above-ground exit on the side of a hill or at least a downwards slope, so that the water that was in the drain can escape to get into the place that normal surface runoff goes from the property.

Can I cover a French drain with dirt?

Can I cover a French drain with dirt? Because a French drain has holes throughout the pipe which allow it collect water, you should not install dirt on top of the drain pipe. Installing dirt will clog the pipe and the holes, rendering it useless.

Whats the difference between EZ Flow and EZ drain?

EZDrain bead is smaller due to manufacturing considerations. EZ-Drain is available in smaller diameter bundles and the smaller bead assembles better. “EZflow” will be used throughout this document to describe both products.

How long will EZ drain last?

100+ year
Extreme Durability. EZ-Drain offers a 100+ year material lifespan.

How far should a French drain be from the house?

How Close Should a French Drain be to the House? A good rule of thumb is to install french drains 3 feet from the house. Make sure to measure around the porch, patio and deck.

Do French drains have to have an outlet?

A properly designed French drain system does not require an outlet. The water will simply soak into the soil as it flows along the perforated pipe. In fact, a French drain doesn’t require an inlet on just one end either. You can construct the drain to accept water along its length, and disperse it underground.

Will a French drain without pipe work?

When you omit the pipe from a French drain, you’ve basically got a trench drain. It’s a good idea to lay a waterproof base if you have poorly draining soil, and if you have old gutters sitting around, this may be a good way to put them to use.

What goes on the end of a French drain?

The two ends of a French drain system are: The drain field, or high end, where excess ground water enters the drain pipes. The drain exit, or lowest point, where water leaves the system.

What is the best pipe for French drain?

Best Pipe for a French Drain Pipes specified to be used on French drains pipes are normally 6-inch diameter perforated PVC SDR-35. If the job or area to be worked is small, you might want to try a four-inch pipe but remember it will all come down to the amount of water being handled.

What is a French drain and how does it work?

– Water flows through the gravel when it rains. – Water enters the perforated pipe through the holes on top. – Water travels down the perforated pipe to an appropriate drainage area.

What is the difference between NDS and NDS Lite?

19.05% more battery power? 1000mAh vs 840mAh

Is a French drain really necessary?

Why French Drains are Necessary If you are a homeowner with a wet basement or a moisture-laden yard, you can likely benefit from a French drain. Any issues with surface water along your property should also spur the installation of a French drain. If your driveway washes out, it is a clear sign you need a French drain.

https://www.youtube.com/watch?v=qJIq5_nBFK4