Table of Contents
How do you set a timer on Horstmann economy 7 quartz?
Turn the knob anti-clockwise to the ‘START’ position to operate the Boost Timer. The Boost period can be limited by turning the knob anti-clockwise to one of the intermediate positions if less than the maximum Boost period is required.
How do you set a Horstmann 425 timer?
Please ensure the clock is set to the correct current time after altering the ON/OFF settings. LIGHTLY PRESS DOWN ON No 1 TAPPET. MOVE TAPPET UNTIL REACHING THE DESIRED ON TIME LIGHTLY PRESS DOWN ON No 2 TAPPET. MOVE TAPPET UNTIL REACHING THE DESIRED OFF TIME REPEAT PREVIOUS INSTRUCTIONS FOR 2nd ON/OFF SETTINGS.
What is the best way to use Economy 7?
Economy 7 is a cheaper option for electricity if you use your electricity at night, to store heat in your storage heater for the next day. By turning off your storage heater during the day and only using it when you need to, you can save the heating for the evening when it’s colder – especially during the winter.
Why does my immersion heater have two switches?
These systems will typically have two immersion heaters installed in the side of the hot water cylinder. Each immersion will be wired into a switch or timer on the wall adjacent to it, where they can be turned on and off to heat the water as required.
How do Economy 7 immersion heaters work?
Using a timer/controller the immersion heater uses Economy 7 or 10 off-peak electricity to heat up a full cylinder of water during the night which is stored for use the following day and evening.
Is the Manual of the Horstmann Economy 7 available in English?
Yes, the manual of the Horstmann Economy 7 is available in English . Is your question not listed? Ask your question here
What is Economy 7 quartz?
A proven, reliable and accurate unit, the Economy 7 Quartz is easy to install and set, providing a tankful of hot water to start each day utilizing Economy 7 off peak rate overnight electricity. The manual boost timer provides extra hot water in the day time – should it be needed.
How do I Mount Economy 7 quartz to a ring main?
If the Economy 7 Quartz is to be connected to a ring main then the spur feeding the controller should be protected in the same way. MOUNTING The Economy 7 Quartz should be removed from the mounting box by unscrewing the 2 captive screws securing the unit to the mounting box. CONDUIT BOX MOUNTING
What cable do I need for Economy 7 quartz?
Heat Cable A points Internal circuit diagram of Economy 7 Quartz. Hole A nals immer c 0 000 000 go term. a s’ neater SINGLE ELEMENT IMMERSION HEATERS The 3 core flexible cord should be heat-resistant and rated to 850C. TERMINAL 4 (Boost live output) should be connected to TERMINAL 5 (Off-Peak live output) and to the immersion heater.
https://www.youtube.com/watch?v=JJ6Chd9GjpY