Miscellaneous

How do you power an extractor in Tekkit?

How do you power an extractor in Tekkit?

Powering the Extractor It can be powered by connecting it to an EU emitting block, such as the BatBox or an LV Transformer, or by placing EU storage items into it, such as the Single-Use Battery or RE Battery. It is a tier 1 processor so it accepts a Low Voltage packet at max to operate.

How do you power a macerator in FTB?

For Example: The Macerator grinds down 1 Tin Ore into 2 Crushed Tin Ore, each of which can be smelted into a Tin Ingot, or washed in an Ore Washing Plant to create Purified Crushed Tin Ore. A Tin Ingot can be ground into a single Tin Dust….

Macerator
Blast Resistance 10.0
Hardness 2.0
Solid Yes
Transparent No

How do you power a macerator with a solar panel?

A macerator containing 16 overclockers requires 8 HV Solar Arrays to fully power. A macerator can also be powered by placing Redstone Dust in its bottom slot. This will power the macerator with up to 13 overclocker upgrades.

How do you use an extractor in insane craft?

The Extractor is used to extract Rubber from Resin, as well as Coalfuel Cells from H. Coal Cells and Biofuel Cells from Bio Cells. Like other machines, there are two ways to provide the Extractor with Energy: either with a direct Cable connection or with energy storage items….

Extractor
ID IC2:{{{id}}}

How do you use the miner in Tekkit?

To use the Miner insert a Drill Bit into the top-left, a Scanner in the top-right and your Mining Pipes into the top-middle. As soon as the Miner has a Drill Bit, Pipes, and power, it will start digging.

How do you charge a battery in Tekkit?

Placing it in a BatBox, Generator, MFE, MFSU, Solar Panel, any Solar Arrays or a Charging Bench will charge it. You can charge the RE-Battery and take it with you to charge any electric tools, such as an Electric Wrench, Electric Treetap, Electric Hoe, and a Mining Drill.

How do you charge a re-battery?

You can charge the RE-Battery and take it with you to charge any electric tools, such as an Electric Wrench, Electric Treetap, Electric Hoe, and a Mining Drill. They are charged by right-clicking while holding. It can also be used to power machines from IC2, such as the Macerator, Generator, or the Electric Furnace.

How do you power a cesu?

It can be rotated via the wrench as well as removed with the wrench. Right-clicking on the CESU will bring up the GUI for the block. The upper empty slot near the middle will charge batteries and tools placed in that are compatible with IndustrialCraft 2, while the bottom slot will drain these items.

How do you make a macerator work in Minecraft?

A macerator can also be powered by placing Redstone Dust in its bottom slot. This will power the macerator with up to 13 overclocker upgrades.

How do you power an industrial craft Miner?

To use the Miner, insert a Drill Bit into the top-left, a Scanner in the bottom-left and Mining Pipes into the middle-left. Ejector Upgrade in the top right slot will make the Miner eject the ores and cobblestone into whatever inventory the Ejector Upgrade is set to eject to.

How do you use the quarry in Tekkit?

A Quarry can function at any level. Simply placing it against a shaft wall and powering it is all that is required to start the default 9 x 9 area. The blocks in the frame area will be destroyed. An underground quarry.

How do you charge a drill in Tekkit?

The Mining Drill can be charged in a Generator, BatBox, MFE Unit, Charging Bench or MFS Unit. It can also be charged automatically by having a BatPack or LapPack equipped, or charged manually by holding right-click with a battery in your hand.