How do you operate the Totaline thermostat?

How do you operate the Totaline thermostat?

How do you set a Totaline thermostat?

  1. Press and hold down the Mode button, then press and hold ‘Override’ for 2 seconds.
  2. Use the direction buttons to set the values you want.
  3. Press Mode to proceed.
  4. Repeat the first step to finish up.
  5. If you have a program switch, simply slide to ‘set’.

How do I reset my Totaline programmable thermostat?

How to Reset a Totaline Thermostat

  1. Press the button labeled “Mode” and hold it down. At the same time, press the “Down” key.
  2. Push the “Mode” and “Fan” keys at the same time. Release both keys after seven seconds.
  3. Slide the “Program” switch to the “Set” option. Press and hold the “Next” button until the Setup opens.

Does Totaline thermostat have battery?

Totaline manufactures battery-powered digital thermostats as well as wired battery backup models. You should change the batteries in any Totaline digital thermostat as soon as you see a low battery alert on the screen.

How do you lock a total line thermostat?

Press and hold the mode button to get the thermostat unlocked. Press and hold the buttons together when holding the mode button. The locked icon will no longer be visible.

How do you turn on the heat on a Totaline thermostat?

Totaline thermostats control both your heating and cooling systems. Selecting each system is done with the “Mode” button. To set the heater operation, press the “Mode” button until the word “Heat” appears on the display. The current “Heat” mode temperature appears under the word.

What does E2 mean on a Totaline thermostat?

Totaline thermostat e2 error code E2 signals low line voltage. This may happen when the furnace or air handler is not powered (tri… | Error code, Coding, Thermostat.

Why won’t my thermostat turn on after changing batteries?

What is this? Sometimes, the thermostat won’t work because you might have improperly installed the batteries. Double-check the battery compartment to ensure that you have installed them in the correct orientation. If you see that you have made a mistake, realign the batteries to place them in the required orientation.

How do I know if my thermostat needs a new battery?

The most obvious sign that you need to change your thermostat batteries is when the thermostat literally tells you the batteries are about to die! Most programmable models will now flash a low battery warning, usually about a month or two before the battery completely dies.

How do you program a totaline thermostat?

Set Clock. The Totaline thermostat has a digital clock display on the top left corner of the LCD screen.

  • Operation. Totaline thermostats control both your heating and cooling systems.
  • Programming.
  • How do you lock a totaline thermostat?

    – Press the button labeled “Mode” and hold it down. – Release both buttons after two seconds and hold down the “Fan/Override” button. – Press the “Mode” button once and release. – Push the “Mode” and “Fan” keys at the same time. – Press “Fan” again and hold it until the display starts to blink or show the word “Fd.”

    How to set your programmable thermostat?

    Be sure to follow your manufacturer’s instructions.

  • Choose either heating or cooling—whichever you will be doing,obviously dependent on the season.
  • Set the temperature for weekdays by setting the switch to heating or cooling and selecting the weekday program.
  • Set the temperature for weekends in the same manner.
  • How to install the thermostat?

    Purchase a digital thermostat from a home improvement or hardware store.

  • Turn off the power to your furnace before beginning digital thermostat installation.
  • Remove the cover of the old thermostat.
  • Remove the screws from the screw terminals in the sub-base of the old thermostat and remove it from the wall.