Advices

How do I reset my shoretel phone?

How do I reset my shoretel phone?

Follow this step-by-step instruction and the phone is starting from scratch:

  1. Type 772667# on the phone keypad.
  2. Enter the default password 1234#
  3. The phone will be reseted and display Factory Test KPD Mode.
  4. Type 25327# (spells clear# ) on phone keypad.
  5. Then the phone will show Clearing Phone Data.

How do I set up my shoretel 230?

With the phone on hook, press the MUTE key followed by 73887# (SETUP#). At the Password prompt, enter 1234 , or the password provided by your system administrator, followed by the # key. Enter the values listed in Table above when prompted. Press # to advance to the next settings or * to exit.

How do you power cycle a ShoreTel phone?

Telephone: Reboot (Power Cycle) a ShoreTel/Mitel Desk Phone

  1. Unplug the Network Cable located between the wall jack and the phone. This cable is located closest to the edge when looking at the front of the phone (pictures below)
  2. Wait at least 30 seconds, then reconnect the cable.
  3. The phone will reboot.

How do I program my ShoreTel phone?

Programming Custom Buttons On The ShoreTel 230 IP Phone

  1. Press the Options button, followed by your password and then press #.
  2. Scroll through the list to option 4.
  3. Press the Edit soft key.
  4. Press the custom button that you would like to program.

How do I reset my ShoreTel 230?

Press the Mute button, which is the second round, gray button located to the right of the handset. The phone’s LED light should be off at this point. If it lights up, pick up and then replace the handset. Then, type R-E-S-E-T on the keypad followed by the # key located in the bottom right corner of the keypad.

How do I access ShoreTel director?

How to Access Shoreware Director

  1. Launch your Web browser.
  2. Click to place your cursor in the address bar at the top of your browser window.
  3. Type “http://” in the address bar.
  4. Type your Shoreware server name or IP address into the address bar.
  5. Type “/ShorewareDirector” and press “Enter.”

How do I unassign my ShoreTel phone?

Unassign a phone

  1. Make sure there are no active calls on the phone being unassigned.
  2. Press the Unassign button.
  3. Press Unassign again on the confirmation window that pops up.
  4. The phone will start to unassign the current user.
  5. If the unassign process was successful, the phone will now show the user as Anonymous.

How do I reset my ShoreTel password?

How do I change my password? Login to voicemail. From the menu, press 7 for Mailbox options. Press 4 to set the password.

How do I reset my Mitel phone PIN?

Users

  1. Navigate to Home > Settings > Phone Settings, which opens the Phone Settings screen.
  2. In the Phone tab of the Phone Settings screen, click the Change Phone PIN or Password button.
  3. In the “Which password do you want to reset?” pop-up dialog that appears, click the Reset Phone PIN button.

How do I reset my Mitel connect password?

To reset your own Connect Portal password:

  1. On the Home menu, under Settings, click Personal Information.
  2. On the Contact tab, under Mitel Log In, click Change Password.
  3. Enter your current password in the Enter current password field.
  4. Enter your new password in the Enter new password and Confirm new password fields.

How do I reset my ShoreTel voicemail password?

How do I set up my ShoreTel phone?

Connect Power over Ethernet: Connect one end of the Ethernet cable to the Ethernet port on the ShoreTel IP Phone. 2. Connect the other end of the Ethernet cable to a network wall port that supports Power over Ethernet. After a few seconds, the ShoreTel IP Phone powers on and runs through a series of system tests.

How do you reset your password for your voicemail?

Android (via Cricket Visual Voicemail) Tap Settings. Tap Password – Manage your Visual Voicemail Password. Enter the current password. Enter the new password.

How do I reset my Mitel 5330e IP phone password?

Can only be done from your phone extension the first time:

  1. Lift Handset and Press Voicemail button.
  2. Follow Voice mail prompts.
  3. Press 7 to enter your new Password (Your.
  4. The system prompts you to record your.
  5. Press 8 for User Options.
  6. At beep record you’re greeting to your callers.
  7. Press 3 to Erase Message, 7 to Review.