How do I reset my Canon Pixma ink cartridge?

How do I reset my Canon Pixma ink cartridge?

Open the Canon IJ Printer Assistant Tool. Make sure that the printer is on, and click Remaining Ink Notification Settings. Select the ink color and click Reset to reset the remaining ink level counter. When you reset the remaining ink level count, you must refill the ink tank to the upper limit line.

What does check ink U163 mean?

When your Canon printer gets to a point when it believes the cartridge is empty you will be presented with a ‘Check Ink’ U162 or U163 message and be prompted to replace the cartridge. This message will also stop you printing and scanning.

Why does my Canon printer keep saying Check ink?

Why your printer getting this error message? It is because the remanufactured ink cartridge is using the original cartridge chip, when the original cartridge was installed and used in the printer, the printer will write down the ink level to the chip memory it used.

How do I fix error code 1410 on canon?

Remove the ink tank and reinstall it the same way you would if you were replacing it. Press the ink tank until it clicks into place. If this does not solve the problem, you will need to replace the ink tank with a new one.

How do I bypass the code 1688?

Support Code = 1688 The ink has run out. Replace the ink cartridge and close the paper output cover. If printing is in progress and you want to continue printing, press the machine’s Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition.

WHAT ARE FINE cartridges?

Canon FINE technology means the ink cartridges have a mechanical printhead built into the cartridge rather than the printer.

How do you get rid of low ink error?

If your printer doesn’t allow you to print, usually a simple reset process will solve the problem.

  1. Take out the cartridge.
  2. Turn off the printer,
  3. Unplug the power cord,
  4. Wait for 5~15 seconds, then plug it back in,
  5. Turn printer back on.
  6. Reinstall the cartridges.

How do I reset my Canon mx320 printer?

Setting the machine back to its factory (default) settings….However, some data may not be changed, depending on the current usage state of your machine.

  1. Press the button repeatedly until [Device Settings] appears.
  2. Press the left or right arrow to select [Reset setting], then press the button.