Guidelines

How do I get into Juniper in config mode?

How do I get into Juniper in config mode?

Switch Between Operational Mode and Configuration Mode

  1. When you log in to the device and type the cli command and press Enter, you are automatically in operational mode:
  2. To enter configuration mode, type the configure command or the edit command in CLI operational mode.

What is the use of configure exclusive command?

Using the configure exclusive command, you can make changes without interference from other users. Other users can enter and exit configuration mode, but they cannot make any permanent changes to the configuration.

What is candidate configuration in Juniper?

The candidate configuration enables you to make configuration changes without causing operational changes to the active configuration or causing potential damage to your current network operations. After you commit the changes you made to the candidate configuration, the system updates the active configuration.

How do I get out of Juniper configuration mode?

To exit configuration mode: Use the exit configuration-mode command from any level. Use the exit command from the top level.

What is configuration mode?

Global Configuration mode mode allows users to modify the running system configuration. From the Privileged mode a user can move to configuration mode by running the “configure terminal” command from privileged mode. To exit configuration mode, the user can enter “end” command or press Ctrl-Z key combination.

What is the configure command?

configure is normally a (generated) shell script which is packaged in Unix-based applications and is used to detect certain machine settings and set up needed files for make to do its job. Look for a configure. bat or a file called configure in the QT directory and run it. Follow this answer to receive notifications.

How do you save a configuration on a Juniper device and make it active?

To save a current device configuration as a rescue configuration file:

  1. Edit the configuration file on the device to reflect the base configuration you wish to use.
  2. In the CLI operational mode, save this edited base configuration as the rescue configuration file: user@host> request system configuration rescue save.

How do you save the configuration file on Juniper SRX?

Just clear the buffer (optional) and use the command “show configuration | no-more”. This will display your complete configuration, you can save the output of the terminal buffer or just copy and paste all the text into your text editor and save it. You can also SCP the file from your device to your local system.

How do I change the IP address on a Juniper router?

To configure a management port by CLI commands.

  1. Use the command “family inet address” to configure a management IP address on the interface.
  2. Configure a static route with the next hop to the management network default gateway set routing-options static route 0.0.0.0/0 next-hop 10.93.15.1/21.

What is the difference between user mode Privileged user mode and configuration mode?

Privileged mode mode allows users to view the system configuration, restart the system, and enter router configuration mode. Privileged mode also allows all the commands that are available in user mode. Privileged mode can be identified by the # prompt following the router name.

What are the 4 types of mode in a router?

There are mainly 5 modes in router:

  • User execution mode – As soon as the interface up message appears and press enter, the router> prompt will pop up.
  • Privileged mode –
  • Global configuration mode –
  • Interface configuration mode –
  • ROMMON mode –