General

How do I clean my HL l5200dw?

How do I clean my HL l5200dw?

Clean the Drum Unit

  1. Make sure the machine is in Ready Mode.
  2. Press or to display the [Machine Info.]
  3. Press or to select the [Drum Dot Print] option.
  4. Press OK.
  5. Press and hold to turn the machine off.
  6. Open the front cover.
  7. Remove the toner cartridge and drum unit assembly from the machine.

How do I clean my Brother HL l2350dw?

Clean the outside and inside of the machine regularly with a dry, lint-free cloth. When you replace the toner cartridge or the drum unit, make sure you clean the inside of the machine. If printed pages are stained with toner, clean the inside of the machine with a dry, lint-free cloth.

How do you clean a Brother HL?

How do I clean my Brother MFC 9130cw printer?

Clean the drum unit

  1. Make sure the machine is in Ready mode.
  2. Press. (Settings).
  3. Press All Settings.
  4. Press the Up or Down arrow key to display Print Reports.
  5. Press Print Reports.
  6. Press the Up or Down arrow key to display Drum Dot Print.
  7. Press Drum Dot Print.
  8. The machine’s display will show Press [OK]. Press OK.

How do I deep clean my Brother printer?

Press or to select the following:

  1. Select [General Setup]. Press OK.
  2. Select [Maintenance]. Press OK.
  3. Select [Print Head Cleaning]. Press OK.
  4. Select [Black only], [Color only], or [All]. Press OK.
  5. Select [Normal], [Strong], or [Strongest]. Press OK.

How do I manually clean my Brother printer heads?

Cleaning the print head.

  1. Do one of the following: – If your Brother machine has the INK key on its control panel, press the INK key.
  2. Press the UP OR DOWN ARROW key to select Cleaning.
  3. Press the OK key.
  4. Press the UP OR DOWN ARROW key to select BLACK, COLOR or ALL depending on what you want to clean.
  5. Press the OK key.

Can you clean a brother drum?

DO NOT clean the surface of the drum with a sharp object or any liquids. Use only a cotton swab, or a dry lint-free cloth. We recommend placing the toner cartridge and drum unit assemblies on a clean, flat surface with disposable paper underneath it in case you accidentally spill or scatter toner.

Why is my Brother printer streaking?

Black, cyan, magenta, or yellow vertical lines or streaks can be caused by a dirty corona wire, a toner cartridge, or the drum unit. Follow the steps below to clean the corona wire and the drum roller. 1. Review your printed pages to identify the color causing the problem.

How do I fix my blurry Brother printer?

Blurry print

  1. a. Press MENU.
  2. b. Press ▲ or ▼ to select Ink and press OK.
  3. c. Press ▲ or ▼ to select Test Print and press OK.
  4. d. Press ▲ or ▼ to select Print Quality and press OK.
  5. e. Press COLOR START. A Print Quality Check Sheet will be printed.

Can I use rubbing alcohol to clean my printer?

Steps for Manually Cleaning the Printer Head Follow these steps: Determine from the owner’s manual where the print head is located. Remove the ink cartridge from your printer and then dip a cotton swab in hot water or isopropyl alcohol and rub it against the print head. This should loosen any crusted ink.

How do I clean smudges off my printer?

How to clean the machine’s printer platen

  1. Unplug the machine from the AC power outlet.
  2. Lift the scanner cover until it locks securely in the open position.
  3. Clean the machine’s printer platen(1) and the area around it, wiping off any scattered ink with a soft, dry, lint-free cloth.
  4. Close the scanner cover.